610.442.2131

Client Case Studies: 1-100  I  Before & After Photo Gallery  I  Client Testimonials  I  Contact York Property Co >>1-10   >>11-20   >>21-30   >>31-40   >>41-50   >>51-60   >>61-70   >>71-80   >>81-90   >>91-100 York Property Company provides proven metal building facade cleaning, refinishing and restoration solutions for caulking stained painted aluminum curtain wall panels, hard water stained anodized aluminum storefront mullions and acid burned stainless steel window frames finishes. At York Property Company we emphasize the distinction between what can be done and what needs to be done. Attention to detail is the hallmark of the York Property Company experience. Have a Question? Ask Us:  Contact the metal building facade and metal curtain wall cleaning, refinishing and restoration professionals today at 610.442.2131 for nationwide service in the United States and Canada. The York Property Company technical staff has decades of experience in damaged metal building facade problem identification and causes with the field experience, knowledge and expertise to provide the correct and most appropriate metal cleaning, refinishing and restoration specification to suit the needs of the subject property; we plan, specify and enable solutions. Our quality control standards, thoroughly trained field crews and constant field supervision ensure our Class A client building owners and managers optimum results with each York Property Company project. Case Study 81 - Seattle, Washington - Repairing Scratched Anodized Aluminum Windows >> View Case Study here. Condition:  The new interior clear anodized aluminum window frames were scuffed, scratched and dented during the installation and construction of Facebook's new offices in Seattle, Washington. As well, steel shavings left iron oxide rust deposits in various locations on the anodized aluminum window frames further compounding the overall damage that had to be remedied. The G.C. requested that we remove the rust, repair the scratches and cap the dents with Class I anodized aluminum break metal. As scratched anodized aluminum refurbishing and dented anodized aluminum restoration contracting experts, our client had confidence we could clean, refinish and repair the damaged anodized aluminum window frames. York Property Company Solution:  To clean off the rust and remove the scratches and stains from the anodized aluminum window sills and frames we used our anodized aluminum restoration, refinishing and reconditioning system. We had to remove the rust and get the oxidation and particulate off while cleaning and refinishing the anodized aluminum without causing any more damage to the anodized aluminum window frame finishes. Although the interior anodized aluminum window mullions, sills and window frames were seriously damaged, our scratched anodized aluminum construction cleaning, restoration and refurbishing program allowed us to clean, repair and restore the scratched, scuffed, marked and dented anodized aluminum to "like new". Case Study 82 - Ottawa, Ontario - On-Site Stainless Steel Sign Refinishing >> View Case Study here. Condition:  During the renovation and restoration of the Shaw Centre in Ottawa, Ontario a new street sign was specified as part of the overall project. A Vancouver, British Columbia fabricator fabricated the stainless steel letters for the sign and had them shipped unfinished to Ottawa. After the letters were installed the specification required an imparted #4 brushed finish. Our firm was contracted to mobilize on-site as the preferred stainless steel refinishing contractor. York Property Company Solution: This project was on a tight deadline. As soon as the letters were installed the York Property Company technicians starting working. The specification had us installing a #4 architectural finish; also known as a brushed, directional or satin finish. Even with the freezing temperatures, the stainless steel was refinished as required. When the graining was complete, all the stainless steel sign surfaces looked new, bright, shiny and were free of welding and fabrication sanding scratches. Case Study 83 - Topeka, Kansas - Mortar Damaged Anodized Aluminum Restoration >> View Case Study here. Condition:  The new clear anodized aluminum factory finish was stained and etched during the construction of this student housing at Washburn University in Topeka, Kansas. During construction acidic concrete slurry, mortar and corrosive cement splashed on the anodized aluminum window frames and anodized aluminum doors. The silver colored anodized finish was acid etched, corroded, scratched and oxidized. The G.C. requested that we get the concrete, cement and mortar overspray stains off and get the acid etching out of the anodized aluminum surfaces. As acid burned anodized aluminum cleaning and chemically etched anodized aluminum refinishing experts, our client had confidence we could recondition, refinish and restore the damaged anodized aluminum surface finishes. York Property Company Solution:  To clean, repair, renew and protect the damaged anodized aluminum surfaces we refurbished the anodized aluminum with our acid etched anodized aluminum restoration cleaning and oxidized anodized aluminum reconditioning system. We had to remove the concrete, cement and mortar overspray, splatter and debris while repairing and refinishing the anodized aluminum without causing any more damage to the thin anodized anodic finish. Although the anodized aluminum building facade window mullions and doors were seriously damaged, our anodized aluminum construction cleaning, restoration and rejuvenating program allowed us to clean, repair, refurbish and restore the acid etched and oxidized anodized aluminum to "like new". The anodized aluminum is protected from further corrosion, oxidation and pitting. Case Study 84 - Toronto, Ontario - Faded Painted Aluminum Curtain Wall Refinishing >> View Case Study here. Condition:  This commercial office building on the waterfront in downtown Toronto, Ontario had oxidized painted aluminum curtain wall panels, chalked and faded painted aluminum cladding and stained painted aluminum window frames due to being exposed to the elements for twenty-eight years. On-site Property Management decided for tenant and aesthetic considerations that cleaning and restoring the exterior curtain wall painted aluminum metal panels, painted aluminum cladding and painted aluminum window frames on the exterior of the building was appropriate. Cleaning and refurbishing the green painted aluminum building facade was less expensive than painting and achieved the same result of revitalizing the painted finishes factory gloss, color and sheen. York Property Company Solution:  A York Property Company Technical Advisor assisted Property Management with the painted aluminum surface damage analysis and the correct oxidized painted aluminum cleaning and refinishing specification for the cleaning, repair and restoration of the weathered, faded and discolored painted aluminum building facade metal panels. As chalked, faded and damaged painted aluminum metal refinishing experts we used our painted aluminum metal restoration system and this eight storey painted aluminum curtain wall was refurbished back to the original dark green with the original luster and sheen. The painted aluminum cladding stains, blemishes and oxidation damage were removed during the painted aluminum refurbishing and reconditioning process. The corrosion, oxidation and airborne particulate are gone and the painted aluminum finish is renewed and clean. The painted aluminum finishes on this Class "A" commercial building will look clean and new for many years to come and are protected from the damaging atmosphere and caustic environmental elements. Case Study 85 - Hilliard, Ohio - Degraded Bronze Anodized Aluminum Building Facade Restoration >> View Case Study here. Condition:  From forty years of exposure this low-rise commercial building in Hilliard, Ohio had oxidized bronze anodized aluminum metal panels, stained anodized aluminum doors and sun faded and bleached anodized aluminum storefront window frames. All of the exterior anodized aluminum finishes were stained, corroded and oxidized. The brown colored anodized aluminum surface finishes were never maintenance washed and the anodized aluminum finish had oxidized and degraded prematurely. The anodized aluminum clad building was for sale and the anodized aluminum building facade needed to look new, reconditioned and clean again. York Property Company Solution:  The owner requested that we clean and restore the oxidized anodized aluminum building facade panels and bleached anodized aluminum storefront window frames. As oxidized, weathered, dull and aged anodized aluminum refinishing experts, with our anodized aluminum restoration system we were able to refinish, restore and protect the anodized aluminum window frame and anodized aluminum panel finishes. When the anodized aluminum refinishing project was complete the anodized aluminum shined with the original factory gloss and sheen. Case Study 86 - St. Petersburg, Florida - Repairing Acid Etched Anodized Aluminum >> View Case Study here. Condition:  The new exterior commercial grade Class I clear anodized aluminum window frames and sills on this Hospital in St. Petersburg, Florida were damaged, discolored, stained and acid etched by the construction cleaning contractor acid cleaning the colored cement based stucco above the anodized aluminum window frames. The acidic restoration cleaning chemical flash etched, acid burned and oxidized all of the clear anodized aluminum window frames and they were no longer clean or in original condition. The General Contractor demanded a solution to clean and refurbish the stained and oxidized clear anodized aluminum window frames to the original color, sheen and condition. York Property Company Solution:  Our anodized aluminum window frame acid etching and anodized aluminum window frame oxidation removal program allowed our on-site technicians to remove the acid etching stains and chemical burns from the anodized aluminum surface finish of the clear anodized aluminum window frames. The commercial anodized aluminum building facade window frames were cleaned, repaired, preserved and protected from any further damage from the caustic environmental elements and are now as good as new for many years to come. Case Study 87 - Lake Norman, North Carolina - Restoring Damaged Anodized Aluminum >> View Case Study here. Condition:  The new bronze anodized aluminum window frames and sliding doors on this 25,000 sq. ft. Lake Norman, North Carolina custom home of a prominent NASCAR Driver were damaged, stained, oxidized and acid etched by the brick mason contractor acid cleaning the brick above the anodized aluminum window frame extrusions. The muriatic acid restoration cleaning agent flash etched and burned all of the building facade bronze anodized aluminum. The milky white chemical staining left the brown metallic anodized aluminum damaged, flash oxidized and acid burned beyond repair by traditional construction cleaning methods and materials. York Property Company Solution:  The General Contractor retained us as acid etched anodized aluminum construction cleaning contracting experts. We were contracted to clean, repair and restore the chemical stained and muriatic acid burned anodized aluminum storefront window frames and anodized aluminum sliding doors and frames. This project required that we repair the acid etching damage and return the anodized aluminum to the original condition without painting, capping or replacing any of the anodized aluminum extrusions. The three storey acid etched anodized aluminum residential building facade storefront was repaired and restored to the original color and sheen specification with our acid etched anodized aluminum construction cleaning and restoration system. Case Study 88 - San Mateo, California - Weathered Aluminum Building Facade Restoration >> View Case Study here. Condition:  The corrugated aluminum clad siding on this historical retail building in San Mateo, California was stained, weathered and severely oxidized from decades of exposure to the California sun. The aluminum siding panels were acid etched, bleached and the finish was uneven. The aluminum silver color was faded and satin sheen was dull. The building owner required our expertise to clean repair, renew and restore the aluminum building siding panels. York Property Company Solution:  Working with the owner and an architect our Technical Consulting Division specified an aluminum siding cleaning, refinishing, maintenance and preservation solution. Ownership wanted the aluminum siding refurbished and the factory finish gloss and luster returned to the aluminum panels. We cleaned, repaired, resurfaced and restored the oxidized aluminum siding and spray applied a lacquer coating to protect the aluminum siding from corrosion, salt air, UV damage, pollutants, weathering and contaminants. Case Study 89 - Myrtle Beach, South Carolina - Painted Aluminum Window Frame Restoration >> View Case Study here. Condition:  The painted aluminum window frames on this luxury condominium in Myrtle Beach, South Carolina had faded and oxidized due to being exposed to the ocean front elements for fifteen years. The condominium board was displeased with the condition of the painted aluminum window frames and for aesthetic considerations was looking for a restoration cleaning solution. Cleaning and refurbishing the brown painted aluminum window frames was less expensive than painting and achieved the same result of revitalizing the painted finishes factory gloss, color and sheen. York Property Company Solution:  A York Property Company Technical Advisor assisted the Consulting Engineering firm with the painted aluminum surface damage analysis and the correct oxidized painted aluminum cleaning and refinishing specification for the cleaning and restoration of the weathered, faded and discolored painted aluminum window frames. As painted aluminum window frame restoration contracting specialists, we analyzed the painted aluminum window frames, conducted tests and prepared remedial painted aluminum cleaning and maintenance specification documents. With the findings of our analysis and painted aluminum remedial maintenance washing specification a painted aluminum cleaning and washing program was implemented over the course of 12 months when each of the 500 condominium units became available. Case Study 90 - Santa Barbara, California - Repairing Acid Etched Clear Anodized Aluminum >> View Case Study here. Condition:  The new clear anodized aluminum factory finish was stained and etched during the construction of this Santa Barbara, California custom home. During construction acidic concrete slurry, mortar and corrosive cement splashed on the anodized aluminum window frames and anodized aluminum doors. The silver colored anodized finish was acid etched, corroded, scratched and oxidized. The owner requested that we get the concrete, cement and mortar overspray stains off and get the acid etching out of the anodized aluminum surfaces. As acid burned anodized aluminum cleaning and chemically etched anodized aluminum refinishing experts, our client had confidence we could recondition, refinish and restore the damaged anodized aluminum surface finishes. York Property Company Solution: To clean, repair, renew and protect the damaged anodized aluminum surfaces we refurbished the anodized aluminum with our acid etched anodized aluminum restoration cleaning and oxidized anodized aluminum reconditioning system. We had to remove the concrete, cement and mortar overspray, splatter and debris while repairing and refinishing the anodized aluminum without causing any more damage to the thin anodized anodic finish. Although the anodized aluminum building facade window mullions and doors were seriously damaged, our anodized aluminum construction cleaning, restoration and rejuvenating program allowed us to clean, repair, refurbish and restore the acid etched and oxidized anodized aluminum to "like new". The anodized aluminum is protected from further corrosion, oxidation and pitting.

York Property Company provides professional dirty anodized aluminum window frame cleaning, weathered anodized aluminum clad panel refinishing, acid stained anodized aluminum building facade window frame restoration and oxidized anodized aluminum window mullion restoration services that restore the color, gloss, luster, sheen and visual appearance. Our highly trained company technicians clean, repair, refinish and restore anodized aluminum, painted aluminum and stainless steel finishes on-site. Ask an Expert:  Contact the metal building facade cleaning and refinishing experts today at 610.442.2131 and request a comprehensive analysis of your building's corroded, stained, rusting and sun faded exterior metal finishes. Schedule a Site Visit:  Our industry-leading, skilled, experienced and knowledgeable technical consultants will specify a customized long-lasting and cost-effective rust stained stainless steel curtain wall panel cleaning, hard water stained anodized aluminum building facade panel cleaning and chemically corroded anodized aluminum storefront window frame refinishing specification that will beautify, improve, recondition, restore and protect all your architectural metal finishes. United States: Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming. Canada: Alberta, British Columbia, Manitoba, Ontario, Quebec and Saskatchewan.

York Property Company Inc. ©  2022   I   Precision Metal Restoration at the Right Price.